• MULTI-PURPOSE HALLS
    byggoganlegg_nologo.jpg
  • NG1 - AID & RELIEF
    Aid & Relief NG1 steel.jpg
  • NG3
    industri_scott.jpg
  • NG5
    Portogdør_avinor2.jpg
  • NG7 - HANGAR
    hangar3.jpg
  • NG7 - TAILORED SOLUTION
    IMG_2259.jpg
  • RAPID DEPLOYMENT
    industri_mongstad2.jpg

ABOUT GIERTSEN HALLS

Our GiertsenHalls are flexible, cost effective, relocatable and can be built as a permanent or temporary construction.

They can be rented, leased or purcahsed - it is completely up to the customer.

The building process is short, and cost price low, in comparison to traditional building.    

STANDARD SIZES

The most popular halls from Giertsen is standards NG3 and NG5. These halls have a span from 10 to 25 meters. The length is more or less up to the client to specify, the standard sections (arch) is constructed to be every 4th meter. As a consequence the length should be able to be divided by 4 (beam every forth meter). The height is specified according to the height of the outside of the legs and can be 3, 4, 5 or 6 meters.

TAILORED AND FLEXIBLE SOLUTIONS

Every hall can, with basis in these standards be tailored to the customers exact needs and wishes in regards to size, insulation, colors, doors and gates. The halls can at any time be shortened or extended according to customers wishes, in regards to changes of the use of the hall.

POPULAR USE OF NG3,5,7

Traditionally our standard halls are used for the following:

  • Dry storage
  • Ventilated storage
  • Insulated storage
  • Engineering hall
  • Productions hall
  • Sports hall
  • Riding hall
  • Exhibition hall

AID & RELIEF: NG1 & NG15

We have extensive experience providing rapid-deployment buildings and shelters for emergency relief operations to customers’ demanding high standards of safe and secure delivery. These shelters can be erected by local labor with simple tools and minimal lifting gear. Foundation requirements are simple allowing installation on a wide range of surfaces. Read more here.

CHOOSING A HALL TYPE

Our standard models can be used for almost the same needs, however when chosing the best option for the customer, geometri and timeframe needs to be considered. The need for a certain height and ceiling space is often the key factor in deciding.

NG - NEW GENERATION

geometri.jpg

Our standard geometries.

From the back - NG3, NG7 and NG5.

CANVAS

We offer different qualities and thicknesses, usually from 650g/m2 to 1000g/m2.

STEEL

Main structure use warm galvanized steel, S355.

SNOW AND WIND LOAD

Our halls will always be made satisfying the local standards for snow- and wind load according to Eurokode 3: NS-EN 1993.

Lys_Viking Life Straume 9027.jpg

Additional Equipment.